Electric devices

/Electric devices

2.2.15 Installation of micro-cogeneration boilers

2.2.15 Installation of micro-cogeneration boilers Description Combined heat and power (CHP), or cogeneration, is the simultaneous production of useful heat and electricity from a single source, close to the point of use. Large scale CHP, suitable for industrial and commercial applications, has been available in the market for some time. Micro-CHP refers [...]

2018-01-16T11:39:17+00:00

2.2.5 Installation of Variable Frequency Drives (VFDs) on motors

2.2.5 Installation of Variable Frequency Drives (VFDs) on motors Description VFDs efficiently meet airflow or water flow variation requirements by adjusting the frequency and voltage of the power supplied to an AC motor to enable it to operate over a wide range of rotational speeds. External sensors monitor flow, liquid levels, or [...]

2018-01-12T12:10:39+00:00

2.5.10 Purchase of induction plates

2.5.10 Purchase of induction plates Description The measure consists in installing induction plates in the kitchen instead of gas or electrical cookers Benefits The cooking heat could be adjusted instantaneously and with great precision as well as with gas cookers Energy is supplied only to the cooking vessel by [...]

2018-01-16T11:47:07+00:00

2.5.9 De-lamp vending machines

2.5.9 De-lamp vending machines Description The lighting system of a vending machine consumes an important portion of its total energy consumption, that is, the light and ballast use typically about 180 W and the total consumption of a vending machine is 400W. The measure consists in de-lamping the advertising light inside the machine. [...]

2018-01-16T11:47:40+00:00

2.5.8 Install vending machine misers

2.5.8 Install vending machine misers Description The vending misers use sensors which control the occupancy near the vending machine and the temperature inside the machine. The vending miser will turn off the advertising light if the area near the vending machine is vacancy for more than 15 minutes and will power down the [...]

2017-11-21T12:55:33+00:00

2.5.7 Purchase bi-thermic dishwashers

2.5.7 Purchase bi-thermic dishwashers Description The "bi-thermic" dishwashers have 2 inputs of water: the cold and the hot, so hot water can be reached from the DHW system, which is heated by solar thermal energy. Benefits Extend the lifespan of the dishwasher because there are not resistors which are [...]

2017-11-21T12:22:40+00:00

2.5.6 Purchase bi-thermic washing machines

2.5.6 Purchase bi-thermic washing machines Description The "bi-thermic" washing machines have 2 inputs of water: the cold and the hot, so hot water can be provided by the DHW system, which could use solar thermal energy. Benefits Extend the lifespan of the washing machine because there are not resistors [...]

2017-11-21T11:56:14+00:00