Lighting

/Lighting

1.4.11 Optimized interior security lighting

1.4.11 Optimized interior security lighting Description The interior security lighting system can be optimized: reducing the illuminance performance (and consequently wattage power) to have a maximum of 54 lux avoiding the use of security light during the day using emergency lights with low capacity backup batteries replacing emergency exit lights by luminous [...]

2017-09-20T09:16:03+00:00

1.4.9 Programming different scenarios for the same place

1.4.9 Programming different scenarios for the same place Description If different activities (e.g. screening, meeting) with different required lighting levels are developed in the same space (e.g. in a conference room, classroom), it shall be given the possibility of adapting easily the illuminance levels to the activity through switches or touchpad controls [...]

2017-09-20T09:10:46+00:00

1.4.7 Appropriate orientation of the work place

1.4.7 Appropriate orientation of the work place Description This measure consists in orienting the workplace to maximize the use of natural light and ensuring that no glare occurs. The most suitable option is by letting the light arrive sideway to the workplace. Benefits It is possible to [...]

2017-09-18T10:41:12+00:00

1.4.5 Reduce the number of luminaires

1.4.5 Reduce the number of luminaires Description The measure consists in removing luminaires in spaces where the light levels are higher than the acceptable working lighting level and the entire luminaire could be removed. Benefits The number of luminaires can be reduced and thus their associated energy [...]

2017-09-18T10:33:40+00:00

1.4.1 Change to task lighting method when required

1.4.1 Change to task lighting method when required Description The measure proposes the installation of task lighting to give the possibility of concentrating light only in working areas or, in general, where and when it is needed through the combination with general lighting. Benefits In offices, energy [...]

2017-09-18T09:22:50+00:00

1.1.14 Maintenance of room surfaces

1.1.14 Maintenance of room surfaces Description Rooms cleaned at regular intervals or painted in such a way that they have a high reflection coefficient over a long period are the basis for maintaining the high efficiency of the supplied light. Benefits Energy savings Improve comfort [...]

2017-09-11T10:46:28+00:00

1.1.7 Correct use of internal solar shading

1.1.7 Correct use of internal solar shading Description Internal solar shadings allow the protection of interior space from direct radiation. The user should close the shading when direct solar radiation is entering the building in cooling seasons, while in heating seasons shadings should be opened to permit that solar radiation and natural [...]

2017-09-08T11:21:32+00:00

1.1.6 Correct use of external solar shading

1.1.6 Correct use of external solar shading Description In cooling seasons users have to block direct solar radiation by closing solar shadings to avoid internal overheating. In others seasons solar shadings should be opened to take advantage of natural light and, in heating seasons also of solar radiation to increase internal thermal [...]

2017-09-08T11:26:16+00:00

1.1.5 Periodic and suitable cleaning of windows

1.1.5 Periodic and suitable cleaning of windows Description It is important to maintain the windows’ glass clean to allow a good penetration of natural light in the building and to improve their use, avoiding the use of artificial light.   Benefits It improves the internal light comfort [...]

2017-09-08T11:27:01+00:00